|
Testimonials from our customers
| “SmartVent is the only product that works as far as intake when there are no soffits. We had many recalls when we used various drip vent products. We can also easily install SmartVent in virtually every venting application we run into: eave, mid-roof, dormer, fire-wall, shed-wall, etc.” |
Ross Appeldorn
Able Roofing
Columbus, OH
|
| “I can honestly say that since I started offering SmartVent to my customers my closing % has increased drastically. It differentiates myself apart from my competition and gives the customer a superior product.” |
Ronnie Lewis
Surelok Homes
Natick, MA
|
| “The biggest advantage of SmartVent is that we don’t have to destroy the existing soffit to get proper airflow. It is also easier to install SmartVent on the roof, than to deal with cutting the fascia board and re-pitching the gutter to use a vented drip edge.” |
- Don Dodson
Shingle Dog Construction
Lodi, OH
|
| “It is effective, practical and easy to install. It is really amazing how much air was pumping through the SmartVent and out the Ridgevent.” |
|
-Jim Lambert
Lambert & Barr Construction
New Milford, CT
|
| “We started to use the SmartVent and SmartRidge II because we can use both products together as a matching intake and exhaust system on every house! This assures the customer they are getting the proper ventilation.”- |
Charles Corey
Corey & Corey
Cummaquid, MA
|
| “Not only did I need a new roof, but I had a problem with heat collecting in my attic because insulation was blocking off the connection between the soffit and ridge vents. After having SmartVent installed, I installed two thermometers that I checked hourly. The highest heat I recorded was 84 degrees. That is 30 degrees below what I used to get!” |
-Fabien
Homeowner
Massachusetts |
Return to Top
|
 |
|
Click here for an expanding list of SmartVent Dealers. If no dealer is located near you please give us a call at 1-800-622-4455 and we will be happy to locate a dealer for you.
|
