Hip Valley Plywood
when using DuPont™ Tyvek® AtticWrap™
Step 1 - Hip vents get ‘wafer’ cuts of 12” with 6” solid plywood intervals
Step 2 - A full 4’ sheet with wafer cuts showing top and bottom uncut for 6” to gain cross strength.
Step 4 - Wafer cut showing two nails per uncut section (6” uncut, 12” wafer cut)
Return to Home Page
Hip Valley Plywood Images
Step 3 - Another wafer cut picture showing 3 ½ “ overall cut (1 ¾ “ each side)
