DCI Products Product & Techniques for
SmartRidge II & RafterVent
when using
DuPont™ Tyvek® AtticWrap™
Products
A view of some stock products that are used with DuPont™ Tyvek® AtticWrap™ . Other products can be viewed at www.dciproducts.com
click on image to view larger image
In order the products are as follows:
#1 – 3/8” RafterVent (3’ long)
#2 – 3/8” RafterVent with Protective fabric (3’ long)
#3 - ValleyVent (2’ long)
#4 – 1” RafterVent (3’ long)
#5 – 1” RafterVent with field applied ½” x 2 ¾” plywood (3’ long)
#6 – 1 ½” RafterVent (3’ long)
#7 – SmartVent (3’ long)
#8 – SmartRidge II (3’ long) includes end cap and fabric
click on image to view larger image
A mitered view of a hip and ridge intersection using SmartRidge II
click on image to view larger image
Cut SmartRidge II using a utility knife.
click on image to view larger image
Shingle over SmartRidge II once installed
click on image to view larger image
Close up view of angle cuts. Note the letters used to mark where each vent is placed
click on image to view larger image
 |
|
|
|
|
|
 |
 |
||||
 |
|
|
|
|
|
