Steps 8 - 15

Step 8 - Cut excess DuPont™ Tyvek® AtticWrap™ from side of 2x3

Step 9 - Cut excess DuPont™ Tyvek® AtticWrap™ from top of 2x3 making sure the DuPont™ Tyvek® AtticWrap™ has a 90° edge above 2x3 (see Step 17)

Step 11 - Take caution to cut the DuPont™ Tyvek® AtticWrap™ tight around the 2x3 as shown.

Step 12 - Install side 2x3 on top of DuPont™ Tyvek® AtticWrap™ and ensure it is 2 ½ longer than rough opening

Step 13 - Pull DuPont™ Tyvek® AtticWrap™ tight over 2x3 and staple

Step 14 - Cut excess DuPont™ Tyvek® AtticWrap™ from side

Step 15 - Install bottom 2x3 flush with rough opening and pull DuPont™ Tyvek® AtticWrap™ tight, staple and trim.

Skylight Application Images

Step 10 - Completed top & side of skylight